|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
To be used with all cutting wheels, sanding discs and polishing wheels.
|
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8"" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4"" bit diameter (6.4 mm). Pack of 6."
|
The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.
|
This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.
|
The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound.
|
The DERMEL EZ lock makes accessory changes easy as pull twist release. The one-piece mandrel design simplifies the process of changing accessories, for use with the EZ402 EZ lock mandrel or standard 402 mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish.
|
For rotary tool #245, 250, Series 3 and later, #260, 270, 280, Series 2 and later, #275, 285, 370, 380, 395, 595, free wheeler 850, mini mite 750, Moto-Flex tools 232 and 332, Chainsaver tools 241, 246, 277 and 8504, flexible shaft attachments 225 and 90199, Handpiece 235 and 237.
|
For rotary tool #245, 250, series 3 and later, #260, 270, 280, series 2 and later, #275, 285, 370, 380, 395, 595, free wheeler 850, mini mite 750, moto-flex tools 232 and 332, chainsaver tools 241, 246, 277 and 8504, flexible shaft attachments 225 and 90199, handpiece 235 and 237.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter.
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
|
|
|
|
|
|
|
|
|
|
|
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
Replaceable bit for the 290 DREMEL? (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving.
|
Dremel? 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|