|
|
|
|
|
|
|
|
|
|
|
Cloverdale Replacement Single Bevel Edge Trimmer Blade, Dimensions: 1/64 x 3/4 x 1-3/4 in, Suitable for: 33437 Edge Trimmer
|
Fasade Backsplash Inside Corner Trim, PVC, White, Matte, 18 in L, Suitable for: Backsplash Panels
|
Appearance-grade, southern yellow pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade J-Trim, PVC, White, Matte, 18 in L
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
|
|
|
|
|
|
|
|
|
|
|
|
|
WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L
|
WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length
|
WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length
|
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Use under Palram's corrugated panels to close off vertical edges for a finished look.
|
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Sanded on four sides.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|