|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on Croft and Keller sliding screen doors. 1/4 in W x 3/8 in Dia flat nylon ball bearing wheel with 3/8 in threaded hex hub. Includes 2 rollers and 2 fasteners.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
3/4 in wide die-cast keeper, screw slots allow for vertical adjustment, universal application. Contains one keeper and installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on Peachtree sliding screen doors. All nylon roller assembly consists of center-grooved wheel and 1-5/32 in L x 13/16 in H x 7/16 in D housing. Includes #8 x 3/8 in Phillips pan head screws.
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat-treated steel v-spring (2 in L before and 2 in L after bend).
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in thick doors. 6-1/2 in distance between attaching screws.
|
Used on Peachtree patio doors. Steel ball bearing roller, adjustable steel housing 2-1/4 in L x 1-9/16 in H x 17/8 in W. Contents: 1 roller assembly.
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by Nu-Air and other glass door manufacturers. Steel housing dimensions: 3/4 in thickness, 1-3/16 in H and 2-1/8 in L. Overall thickness of roller assembly: 7/8 in. Concave roller edge type and plain back housing tab style.
|
PL 15576 is a 96 in stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to size. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.
|
Hardwood Pull with one-piece die-cast aluminum body. Aluminum door handle. Surface mounted handle. Includes one inside pull and installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface.
|
Black die-cast supports w/wood handle. Mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2 to 6-5/8 in center-2-center. Surface-mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.
|
2-roller tandem design. 6-1/4 in L x 1-3/16 in H x 11/16 in D adjustable steel housing with 2 steel ball bearing rollers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel glass door roller. Housing width: 3/4 in. Roller edge type: Concave. Includes 1 roller assembly.
|
Die-cast, flush mount, standard hook, fits all popular flush lock punch outs, reversible latch hook, chrome keeper. Contains (1) inside latch and pull, (1) outside pull, (1) wood handle, (1) spacer, (1) keeper, (4) hook assortment and installation fasteners.
|
Fits all popular flush lock punch outs for 1 in Thk doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, 1/2 in and 5/8 in). 6-5/8 in installation hole spacing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
Steel hook; nite latch feature; universal design; interchangeable, reversible hooks. 4 Hook Assortment, surface-mounted latch style: Hook Style Hole Center: 6-5/8 in. Includes 1 inside latch and pull, 1 outside pull, 1 locking cylinder, 1 keeper and 1 set of installation screws.
|
Wright Products flush mount patio door latch will work on both right or left hand door applications. Aluminum finish only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in Thk door rails.
|
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails.
|
For 1 to 1-3/8 in aluminum doors. Internal latching, reversible for right or left hand application. Oak handle. 3-15/16 in installation hole spacing.
|
|
|
