|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
National Hardware V211S Bracket Screw, Steel, Zinc
|
National Hardware V108S Bracket Screw, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg, second measurement denotes nominal length of wall leg. Bulk pack.
|
"Accepts a 1-3/8"" diameter standard wood pole. 2-3/16""OD x 3/4"" overall. Includes one pair of pole sockets and two No.8 x 3/4"" Phillips flat head screws."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware BPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
The ProSource shelf bracket dimensions are 1/16 in W x 2-3/8 in H x selected depth. Suitable to use with ProSource shelving. The UPC is tagged.
|
National Hardware V107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10165 is a shelf support peg, with a 5 mm diameter. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
National Hardware MPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 24 in H x selected length. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
The U 10156 is a plastic shelf support peg with a 3 mm diameter steel peg, to provide extra strength when needed. Used by many cabinet manufacturers. 10 lb maximum safe load per peg.
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide? shelf and hang rod.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid Support Bracket, 12 in L, 2 in W, 2 in H, White, Steel
|
ClosetMaid Shelf End Cap, Dimensions: 1/4 in Dia x 0.4 in D, Plastic, White, Suitable for: ClosetMaid Shelf and Rod Shelving, Includes: (10) Small End Caps and (4) Large End Caps
|
National Hardware V211S Bracket Screw, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for mounting 1 in wood or steel closet poles. Satin brass color.
|
For use with cabinets and storage cabinets with glass shelves.
|
The U 10166 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
Prime-Line Shelf Support Peg, Load Rating: 5 lb, Peg Diameter: 5 mm, Peg Length: 3/8 in, Plastic, Mill, Clear
|
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2 in pan head screws for mounting brackets to the wall. Four 3/4 in pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf and rod bracket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet pole or 1 in Dia pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy and strong. Includes one pair of pole sockets.
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
|
|
