Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED MISC PRIMERS/SEALERS
Sort By:
1 2 3 ... 8
Zinsser 2008 Bulls Eye 1-2-3 Primer/Sealer WaterSeal 10100 Multi-Surface Waterproofer Thompsons TH.010501-18 Sports Seal Fabric Protector
Zinsser Primer, Series: Bulls-Eye 1-2-3, 13 oz, Aerosol Can, Water Base, Styrene Acrylate Copolymer Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Spray, -156 Deg F Flash Point, 502 g/l VOC, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications WaterSeal Multi-Surface Waterproofer, 12 oz Capacity, Aerosol Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method WaterSeal Fabric Protector, Series: Sport Seal, 11.5 oz, Aerosol Can Packing, 98 % VOC, Clear, Matte, 60 sq-ft Coverage, 24 hr Drying Time, Media: Carbon Dioxide, Dry Chemical and Foam, Composition: Propane, Butane, Mineral Spirits and Acetone, Flammability Rating: 4, 0.72 Specific Gravity, Application Method: Spray, <120 deg F
Kilz 10004 Stain Killer Primer Sealer Zinsser 3688 Covers Up Primer/Sealer Rustoleum Cover-Stain Primer Sealer
Kilz Primer Sealer, Stain Killer, Kilz, 13 oz Capacity, Aerosol Can Packing, Oil Base, White, Mild Odor/Scent, Application Method: Spray, -156 deg F Flash Point, For Interior Use Zinsser Ceiling Paint and Primer, Series: COVERS UP, 13 oz, Aerosol Can, Solvent Base, Acrylic Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 12 - 15 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 476 g/l VOC, 70 - 80 Deg F, Suitable For Use With: Primed or Previously Painted Ceiling Tiles, Drywall, Cured Plaster, Wood, Aluminum, Iron, Steel and Galvanized Metal and PVC, For Interior and Exterior Applications Rustoleum Primer Sealer, Series: Cover-Stain, 13 oz Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Solvent Odor/Scent, 400 - 450 sq-ft Coverage, 30 min Drying Time, -105 deg C Flash Point, 525 g/l VOC, 40 - 80 deg F, For Cedar and Redwood
Thompsons TH.010502-18 Fabric Seal Fabric Protector PRIMER INTR/EXT ORIG AERO 13OZ PRIMER SEALR OBS ODRLESS SPRAY
WaterSeal Fabric Protector, Series: Fabric Seal, 11.5 oz, Aerosol Can Packing, 98 % VOC, Clear, Matte, 60 sq-ft Coverage, 24 hr Drying Time, Media: Carbon Dioxide, Dry Chemical and Foam, Composition: Propane, Butane, Mineral Spirits and Acetone, Flammability Rating: 4, 0.72 Specific Gravity, Application Method: Spray, <120 deg F Zinsser Stain Primer, 13 oz, Aerosol Can, Oil Base, Alkyd Resin, Liquid, White, Solvent Like Odor/Scent, 820 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 350 - 400 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 2 hr to Recoat, 7 hr to Full Hardness Drying Time, Application Method: Spray, 106 Deg F Flash Point, 476 g/l VOC, 40 - 90 Deg F, Suitable For Use With: All Types Of Bare or Painted Interior Surfaces Including Wood, Drywall, Plaster, Concrete, Stucco and Masonry Surfaces, For Residential and Commercial Property Maintenance
Rustoleum 290971 Bulls Eye ? 123 Plus Primer/Sealer Kilz Upshot 10007 Primer Sealer Masterchem 10444 Kilz Odorless Primer/Sealer
Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 13 oz, Aerosol Can, Water Base, Acrylic Modified Alkyd Resin, Liquid, Gray, Smooth, Solvent Like Odor/Scent, 10-12 sq-ft/Can Coverage, 30 min Drying Time, Application Method: Spray, -20 Deg C Flash Point, 480 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces Kilz Upshot Primer Sealer, Kilz, Upshot, 10 oz Capacity, Can Packing, Oil Base, 18 sq-ft Coverage, 15 min Drying Time, -156 deg F Flash Point, Titanium Dioxide, Talc, Magnesium Silicate Hydrate, Aliphatic Hydrocarbon, Rutile, Silicate, Mica Composition, For Eye Protection, Blocking Most Ceiling Stains Like Water, Smoke and Grease KILZ Odorless Primer Sealer, 13 oz, Aerosol Can, Oil Base, White, Solvent Odor/Scent, 20 - 25 sq-ft Coverage, Application Method: Spray, -156 Deg F Flash Point, 60 % VOC, 50 - 90 Deg F, For Offices, Schools, Dining Areas, Apartments and Other Areas
WaterSeal TH.024104-14 Multi-Surface Waterproofer Kilz 20002 Primer Masterchem 10002 Extra Strength Stain Killer Primer Sealer
WaterSeal Multi-Surface Waterproofer, 1 qt Capacity, Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method, Resists Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Masterchem Primer Sealer, Extra Strength, Stain Killer, Masterchem, 1 qt Capacity, Oil Base, Paste, Almond, Mild Odor/Scent, 26 ft Linear/1/4 in Head Coverage, 1.34 Specific Gravity, 0.14 VOC, 8.5 - 9 pH, 40 - 120 deg F, For Furniture, Drywall, Plaster, Woodwork, Paneling, Glossy Surfaces, Masonry, Brick, and Painted Surfaces
Wolman Classic II Woodlife Wood Preservative Kilz 13002 Primer PRIMER INTR/EXTR ORIGINAL 1QT
Provides a mildew protection, penetrating preservative protection and water repellent surface protection. Controls warping, splitting, shrinking and swelling of wood. For all above ground structural pressure treated and untreated wood. Paintable and stainable. EPA registered. Covers approximately 150-250 sq. ft. per gallon depending on wood age and species, surface porosity and method of application. Soap and water clean-up. Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F
PRIMER SEALR SHELLAC BS 13OZ  Rustoleum Cover-Stain Interior/Exterior Primer Sealer Drylok 27512 Latex Based Masonry Waterproofer
Zinsser Primer Sealer, Series: B-I-N, 13 oz, Aerosol Can, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 15 min to Touch, 30 min to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 551 g/l VOC, 70 Deg F, Suitable For Use With: Ceramic Tile, Glass, Metal, Plastic and Hardboard, For Interior Applications Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 qt Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood Drylok Masonry Waterproofer, Latex Based, Series: 27512, White, 1 qt Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain
Deft 015-13 Lacquer Sanding Sealer Zinsser 249019 Bulls Eye Zero Primer/Sealer California 50600-4 Primer/Sealer
Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. Zinsser Primer Sealer, Series: Bulls Eye Zero, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 - 45 min to Touch, 1 hr to Recoat Drying Time, 1.273 Specific Gravity, >200 deg F Flash Point, 0 VOC, 50 - 85 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer FixAll Universal Primer, Series: 50600, 1 qt, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class
Zinsser 02004 Bulls Eye 1-2-3 Primer/Sealer PRIMER INTERIOR/EXTERIOR 1QT  Kilz 10042 Interior Primer Sealer
Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 qt, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Kilz Primer Sealer, Interior, Series: 10042, 1 qt Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling
Zinsser 249727 Smart Prime Primer/Sealer Zinsser 249933 Bulls Eye - 123 Plus Primer/Sealer Wolman Coppercoat Woodlife Wood Preservative
Zinsser Primer Sealer, Series: Smart Prime, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 qt, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Prevents attack from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. EPA registered, insecticidal preservative prohibits rot and decay. Anti-wicking property resists moisture absorption controls warping, swelling, and end checking. Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Covers approximately 200 to 350 sq. ft. per gallon.
   
 
1 2 3 ... 8