|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on wood and soft metals. Used by woodworkers, hobbyists and plumbers.
|
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse grade is perfect for use on concave, convex and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
|
Single cut file teeth on edge for use on wood and soft metals. Used by woodworkers, hobbyists and plumbers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plain horse rasps are double-ended with rasp teeth on one side, file teeth on opposite side, rectangular shape. Thin fine-toothed rasp for shoeing racetrack, riding horses and ponies.
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
Maximum cutting surface gives rapid removal and smoother finish. Opposite side has the Nicholson Magicut? file pattern that are narrow chip breakers created by steep and angled serrations. Single cut on edges, rasp cut is 6 teeth per row for faster cuts, rectangular shape, tooth cuts deeper to last longer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
|
|
