|
|
|
|
|
|
|
|
|
|
|
|
|
|
Small screw-in insulator.
|
Model clips hold electric fence wire and polytape (up to 2" wide). Molded of reinforced polypropylene with a heavy-duty steel stake. Extra reinforcing ribs for strength. Features large step-in flange and anti-rotation spike to keep stake from turning. Includes 8 wire holders.
|
Heavy duty fence post keeps your property protected. Molded clips to hold electric fence wire and poly tape (up to 2" wide. Each 4' post molded from reinforced polypropylene with a heavy-duty steel stake.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For firmly securing an electrified wire to corner posts without losing energy through the post. Formed of thick, tough plastic. Can withstand the strain of wire at corner of electrified fence. For 9-22 gauge high-tensile steel wire and aluminum wire, all polywire (regular and heavy duty), and polyrope up to 1/4" in diameter. Can use on chain link fence.
|
Large screw-in insulator.
|
Connects 1" polytape to the end insulators to reach all of your fence posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For splicing polytape up to 1/2" wide. Allows for fast, secure joining of polytape rolls. Connects one polytape to another without losing juice.
|
Molded of tough, high quality plastic with shockproof thickness for safe handling protection.
|
For a secure connection between ground wire and ground rod. Heavy duty construction. Made of aluminum; will not rust. For use with 5/8" and larger ground rods. 1 clamp per pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Super tough fiberglass reinforced electric fence post. Unique step-in design with adjustable insulators that can be used with Baygard wire, Bayshock wire or Baygard HV tape. Designed for improved strength. Complete with 4 versatile insulators that can accept wire, tape and rope. Weather resistant. Non conductive and lightweight.
|
Made of virgin, high impact polyethylene. Designed for quick, easy installation. For use with heavy gauge wire and barbed wire.
|
Connects 1/2" polytape to another without losing power so you can reach distant electric fence posts. Use at the ends of polytape for dead-ending or gate handle connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire.
|
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25.
|
For splicing together 1/4" polyrope. Allows for fast, secure joining of polyrope. Can also be used to make electrical connections between fence lines and the fence charger.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with fence wire and polyrope. Insulates against shock.
|
Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene.
|
Anchoring gate handles. This insulated anchor is to be used in conjunction with the gate handle. The screw-in design type is for wood gate posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
125 to 145 Breaking Load Limit.
|
Pigtail clip holds electric fence wire and polytape. Step-in flange for easy installation. Anti-rotation spike to keep post in place. Easy-to-thread insulated pigtail clip.
|
Connects 2" polytape to the end insulators to reach all of your fence posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible. Connects the polytape to the energizer.
|
Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel.
|
90 Pound Breaking Load Limit. Lightweight. Rust-proof.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post.
|
Black letters on a yellow polypropylene background. Two holes for fastening to fence wire or nailing to wood post. 3 signs. "Warning! Electric Fence" printed in English, French and Spanish languages.
|
For anchoring gate handles. This insulated anchor is to be used in conjunction with the fence gate handle. The screw-in design is for T-post gate posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Checks current in electric fence with a one-light application. Has a plastic case with 42'' of plastic coated cord.
|
For insulating corner wood posts that have polytape. Made for all poly tape widths up to 2". For standard T-posts (1.25 and 1.33). Use at corners, ends or T-junctions. Fully insulated. All metal parts are stainless steel. Molded of high density polyethylene with UV inhibitors.
|
For connecting strands of polytape. Simplifies electrical connections between strands of polytape. Stainless steel plate holds the tape securely and will not corrode.
|
|
|
